September 9 2004

ABS surveyors monitor fabrication of first offshore LNG port buoy

ABS Surveyors monitor fabrication of STL unit for offshore LNG facilityABS surveyors have been on site at Junoverken AB yard in Uddevalla, Sweden, to monitor and inspect the fabrication of industry's first offshore LNG deepwater port buoy, designed by Advanced Production and Loading AS of Norway (APL).

The port buoy will be ABS-classed as a Maltese Cross A1 Single-Point Mooring (SPM).

APL has contracted ABS to provide classification services for its Submerged Turret Loading (STLTM) system, a single-point mooring system (SPM) and an integral component of the industry's first offshore LNG terminal, destined for the Gulf of Mexico, some 116 miles offshore Louisiana.

ABS, which has classed some 40 SPMs worldwide, is extending its classification services to make the first step in offshore LNG development both safe and efficient, as operators seek to apply offshore technology to innovations for gas transfer in a marine environment.

Dubbed the Energy Bridge Deepwater Port, the terminal system incorporates APL's STL technology commonly used in the offloading of oil in regions including the North Sea, offshore China and offshore Western Australia.

The STL buoy, planned for installation on West Cameron Block 603 in 280 feet of water, is scheduled for transport to U.S. waters this November. First cargo for the Energy Bridge Deepwater Port is scheduled for January 2005, with planned capacity to deliver base load gas volumes in excess of 500 million cubic feet per day.

The 186-ton STL unit will allow specially built LNG carriers fitted with onboard re-gasification equipment to transfer gas through the buoy, which is connected to a pipeline end manifold (PLEM) on the seafloor. ABS' scope of work encompasses the submerged turret loading buoy; the mooring system for the buoy; and the riser to take the gas from the buoy to the PLEM.

MORE NEWS STORIES


REGULATORY OVERLOAD?
Know what maritime regulations are in the works and what you need to do to stay ahead of the curve

Two day conference, Washington, DC September 23 & 24, 2004



Tell a friend: